11-05-2022, 09:23 AM
Gordon,
Your memory and explanation are spot on.
The key point being, and I realize that I am repeating what you and Rudy said, that the relay is activated or the pump would not run. The next logical check is to put a voltmeter on terminals 4 and 6 to see if they have 12v. The fans are typically powered by either of these terminals as indicated by the manual in the link I posted.
If those terminals have 12v, then I would check the continuity between there and the terminals at the fan.
Your memory and explanation are spot on.
The key point being, and I realize that I am repeating what you and Rudy said, that the relay is activated or the pump would not run. The next logical check is to put a voltmeter on terminals 4 and 6 to see if they have 12v. The fans are typically powered by either of these terminals as indicated by the manual in the link I posted.
If those terminals have 12v, then I would check the continuity between there and the terminals at the fan.
Richard and Rhonda Entrekin
95 Newell, 390 Ex caretaker
99 Newell, 512 Ex caretaker
07 Prevost Marathon, 1025
Maverick Hybrid Toad
Inverness, FL (when we're home
)