12-28-2023, 10:17 AM
Bring the room in. Look to make sure the “hook” that moves the ceiling fan/light with the room is not impeding removal. Bang straight up on the valence. It may take some force to pop it loose. It is a friction fit.
When you get the valence off, remove the strip of dust brush. You will see there are 4 Allen head bolts holding the slide pin. If you don’t remove the brush strip, the upper bolts are hidden.
And I don’t know about the disabling of the solenoid.
Have you found Steve Denton’s excellent post on rebuilding the slide pin hydraulics?
When you get the valence off, remove the strip of dust brush. You will see there are 4 Allen head bolts holding the slide pin. If you don’t remove the brush strip, the upper bolts are hidden.
And I don’t know about the disabling of the solenoid.
Have you found Steve Denton’s excellent post on rebuilding the slide pin hydraulics?
Richard and Rhonda Entrekin
95 Newell, 390 Ex caretaker
99 Newell, 512 Ex caretaker
07 Prevost Marathon, 1025
Maverick Hybrid Toad
Inverness, FL (when we're home
)