07-12-2024, 05:09 PM
Thanks Richard.
Unit is from Undermountac.com
48v DC system. I will get some pics when I go out there in a little bit. it's 113 in the shade now.
Wires appear to be #10 but could be #8 with a very thin insulation. Thinking they are 10. I was surprised the seller didn't know but I guess that's ok. He just assembles these kits. So far it's been working great for the last three months running non stop and under severe conditions. My victron will send a slight voltage spike which shuts down the compressor. System will run but not cool. This has happened three or four times. No fault of the supplier. What I want to do is install an inline remote controlled battery switch where I can reset the power with a button from the driver seat next to the thermostat. In doing this, I did not want to cut the stock connectors but instead use a plug and play method. Supplier suggested I read off the flashing LED code under the compressor cover the next time this happens. He hasn't seen any issues before. I will say that Tom the owner of Undermount a/c has been super responsive and helpful. I still stand behind their company in terms of quality and technical support.
Unit is from Undermountac.com
48v DC system. I will get some pics when I go out there in a little bit. it's 113 in the shade now.
Wires appear to be #10 but could be #8 with a very thin insulation. Thinking they are 10. I was surprised the seller didn't know but I guess that's ok. He just assembles these kits. So far it's been working great for the last three months running non stop and under severe conditions. My victron will send a slight voltage spike which shuts down the compressor. System will run but not cool. This has happened three or four times. No fault of the supplier. What I want to do is install an inline remote controlled battery switch where I can reset the power with a button from the driver seat next to the thermostat. In doing this, I did not want to cut the stock connectors but instead use a plug and play method. Supplier suggested I read off the flashing LED code under the compressor cover the next time this happens. He hasn't seen any issues before. I will say that Tom the owner of Undermount a/c has been super responsive and helpful. I still stand behind their company in terms of quality and technical support.
--Simon
1993 8v92TA #312