[pairodice]

Richard’s post: Let’s start here. Lower the coach all the way down using the LEVEL mode. With the engine running, put it in travel and wait five minutes. Shut off the coach and now measure.
TESTING:
1) I hit the LEVEL function button after being in the TRAVEL mode… and waited 5 minutes for the magic to happen… the leveling seems to work perfectly from travel mode! I think my test was faulty - it seems the driver side did not really move up/down when I went into LEVEL mode - this means the passenger side moved only… :-(
2) Richard didn’t ask this but I wanted to test while I’m here at the RV: I DUMPED the coach and noticed that the driver side did not move. I then tried to manually raise/lower the driver side to no avail. I tried lowering the front and only the driver front lowered - only the passenger side is moving up/down the driver side is not moving - it’s like it’s locked in place…
I did check the fuses in the HWH box in the front driver side bay and the fuses all look good - I will check that I am getting voltage to the #59 fuse