[[email protected]]

Decided not to start a new thread about the fridge lock not working since I found this one in my search to figure out what is wrong. Here is what I found, I have no power going to the solenoid, if I put power to it, it works fine. I then went to the fuse panel up front, found the fuse #6 for air horn and fridge lock and I checked with my probe and there is 12v on the blade terminal going to the fridge lock. So then I went to the switch across from the fridge to override the lock when the ignition is on and there is no 12v at the switch on either side. So somehow I am losing the voltage somewhere in between the fuse panel and the switch at the control panel across from my fridge. My next move is going to get my fox and hound out and put a signal on the wire at the fuse panel and see if I can trace where I lose the signal. If anyone has any other suggestions I am all ears. Seems somehow I have an issue in the middle of the wire. So I went back to any area where I did work previously. I added a camera up high on the sides of the coach and I opened the compartment up above the passenger seat and made sure that somehow I did not damage the wires there and I found nothing out of place there.