12-24-2024, 06:43 AM
Look in the bay just by the circuit breakers for the inverter. Do you have a plug right there? If so, move the plug to the open plug in. That completely bypasses the dead inverter.
And if not, a bush fix would be to unwire the incoming voltage to the inverter, use lug connectors, and wire it directly to the outgoing wiring for the inverter. Essentially doing a hard bypass.
In either case you will have to run your gennie while not plugged in, but you can get by.
And if not, a bush fix would be to unwire the incoming voltage to the inverter, use lug connectors, and wire it directly to the outgoing wiring for the inverter. Essentially doing a hard bypass.
In either case you will have to run your gennie while not plugged in, but you can get by.
Richard and Rhonda Entrekin
95 Newell, 390 Ex caretaker
99 Newell, 512 Ex caretaker
07 Prevost Marathon, 1025
Maverick Hybrid Toad
Inverness, FL (when we're home
)