01-10-2025, 07:00 AM
Tom,
I have a hand crimper that should work, at least for some of your work, I believe I bought from ferrules direct. It is part number FD1004UL, but it might be discontinued. I bought it on steep discount.
However I believe it is a square crimper with a waffle type pattern. I used it once for something not intended for and it seemed fine. You can borrow it if you like.. It says it is for 10 to 4 Ga so it might for your size ferrules depending on wall thickness.
It reads 6 10 16 and 25mm^2
I forgot I might also have another one that I bought for hand crimping anderson connectors from Powerwerks that has a bunch of additional dies. I can look into it tonight if you like.
I would think the hydraulic crimper would work too, you might need to adjust to a smaller size thought because of the thinner wall of most ferrules
I have a hand crimper that should work, at least for some of your work, I believe I bought from ferrules direct. It is part number FD1004UL, but it might be discontinued. I bought it on steep discount.
However I believe it is a square crimper with a waffle type pattern. I used it once for something not intended for and it seemed fine. You can borrow it if you like.. It says it is for 10 to 4 Ga so it might for your size ferrules depending on wall thickness.
It reads 6 10 16 and 25mm^2
I forgot I might also have another one that I bought for hand crimping anderson connectors from Powerwerks that has a bunch of additional dies. I can look into it tonight if you like.
I would think the hydraulic crimper would work too, you might need to adjust to a smaller size thought because of the thinner wall of most ferrules
Coach 500 1998