[RobSC]

I've been looking for an electric to replace my 25 year old gas pressure washer. The problem I'm running into is I have a couple nice wands, extension pole, better quality hoses, all of these use the quick connects. All of the electric washers I've found use the screw on connections.
Could you tell me if the high pressure screw on connector on the pump can be removed and replaced with a quick connect type?
I'd rather use my commercial quality hoses, etc. than the ones that come with the electric ones.
Thanks!

I added 3/8" quick connects on my AR Blue Clean.  They accept a standard threaded M22 x 14mm or M22 x 15mm depending on the model.  I believe the consumer models use the 15mm and the pro models use the 14mm.

https://www.obsessedgarage.com/collectio...nless-plug
https://www.obsessedgarage.com/collectio...nless-plug