[Gem930]

My passenger side waste tank dump has a small leak on the bottom of the fitting where it connects to the tank.  I called Newell and they said this bulk head fitting is spun welded and they remove the tank to make these kind of repairs.  While I’m not opposed to that, if it ultimately becomes necessary, I’d like to try some kind of two part epoxy fix, first.  The leak is very small and only drips when there is over a 1/2 tank of head pressure. The leak is definitely on the bottom of the fitting.  The entire fitting is dry, except on the bottom.  Has anybody had any kind of luck with any specific type of epoxy or putty?
Thx! 

Gregg
530-228-5399