[justinn]

Auto Transformer checks good at 244 VAC.  With the Auto Transformer circuit breakers tripped OFF, the second VFX2812 fan came on and I measured 236 VAC in the inverter circuit breaker panel in the electronics bay.  That panel has NO breakers assigned to the cooktop.  The only Cooktop breaker I have found is in the rear closet main breaker panel.

For those with the Outback system, is your cooktop circuit breaker in the Inverter Breaker panel or the Main Breaker panel?

I'm in China at the moment, but IIRC, the cooktop is only in my panel at the back as well, Jim. If I am not mistaken, the cooktop was one of the contactors(and automatic load management) that I bypassed. My rig is a quite a bit older than yours, but was Newell still using the contactor load management in the the newer Newells like yours?

Is the breaker panel in the rear of the bus also live on both legs?

If you do still have the contactors for the load management, I would start there. It seems weird that it would work on Shorepower, but not work through the inverters. I can't remember exactly how mine are wired at the inverters.


Justin