[Dystrakti0n]

No number stamped on seal. 6773311 (the one allison says it has to be) will not physically fit the bore. The aluminum around the seal would be crushed by the yoke. The depth of the bore to where the outside of the case is, is half as deep as the diagram being pulled up. There are 2 sets of I guess you would call standoffs inside the case where the yoke slides over the spines that would also prevent the spec'd seal from going through and the seal I have looks to ride on the yoke itself.

I will check on the other forums. I've got to move out of Nellis today due to leak, and their pedestal trying to burn the coach down due to a floating ground under load that slagged a neutral in my 50 amp panel and melted a romex coming out the top. I've been running this coach off of a victron quattro 15kva for 1.5 years, hooked up to 10 different 50A with zero problems, and I'm running off it now, but the over night guy says "tested normal " under zero load, with no continuity check. We are going to limp 1.5 hrs south to the southern Navada visitors center overflow parking where I can pull this thing apart again and run back into greater Vegas to find this elusive seal. I have more pictures but I dont know how to add them to a reply. Hits keep coming but we shall soldier on!

As my wife says, "what else are you going to do? Relax?" ??

Thanks again for all the input and responses!