You are not logged in or registered. Please login or register to use the full functionality of this board...


Panel Switches Strange Behavior
#1

I have a strange phenomenon happen when I press the button to turn the auxiliary air compressors on or off on one of the control panels next to the microwave. When the auxiliary compressor switch is in the off position, the compressor button and three of the other six buttons on that panel turn on as if those buttons have been pressed and those items turned on (main water pump, diesel hot water, and electric hot water). Those extra items do not turn on, but their buttons show they are on. If I press one of those buttons, the item turns on and off normally, but the light stays on. Additionally, a panel above the front entry door has three buttons that also turn on (outside flood lights). Again, pressing those buttons toggle the items on and off, but the panel lights stay on regardless. The buttons in the water bay also show the main water pump as on all the time. When I press the auxiliary compressor to the on state, all other panel lights behave normally. Since I am chasing air leaks, I have been turning the compressors off so they don't run all the time, but it's driving me nuts to not know if my water pump and water heaters are really on or off. I've been turning the compressors on so my panel lights work correctly and have been physically unplugging the compressors to keep them from running. Is this one for the Newell factory to address and replace a faulty button panel? Or is there some other approach I can try. I did disconnect all power, including turning off all switches in the battery bay so there was no power to the coach and let it sit for a long while. I thought that may reset something, but it did not work.

Pat
Superannuated Peregrinator
2008 Newell 1223
Reply


Messages In This Thread

Forum Jump:


Users browsing this thread: 1 Guest(s)