[Pluto]

I stuffed a paper towel around the filler neck the best I could and there was nothing on it when I removed it. I wasn't really able to get it all the way around the neck though because of clearance issues.

I raised the coach so I could get a good look of the exhaust outlet. It appears to be dripping from the tray that the unit sits in and not from the exhaust itself. I squeezed back behind the AH and could see coolant pooling between it and the water tanks.

I'm thinking that we were sitting slightly out of level which was causing the coolant to pool up on the side towards the front of the coach. There is no fluid in the tray on the burner side of the unit.

The coolant level wasn't as low as I thought, but I did top it off with some fresh antifreeze.

I'm not sure what to do next in order to locate the leak. It's starting to drop below freezing here at night and we have to have the heat going. I guess we will continue to monitor the coolant level and top it off as needed.