07-18-2026, 06:35 AM
The roof units that I looked into a while back would replace one of the existing vents on my coach. It will not interfere with my solar panels.
I am thinking that I would 3d print a manifold to the internal unit so that I can duct it out in the hallway above the refrigerator vent holes. This would augment my fully functional SCS units to add cooling being that I am located in Phoenix, and you can never have enough cooling...
I dont know the noise of the units, but imagine it to be fairly unobtrusive.
I am thinking that I would 3d print a manifold to the internal unit so that I can duct it out in the hallway above the refrigerator vent holes. This would augment my fully functional SCS units to add cooling being that I am located in Phoenix, and you can never have enough cooling...
I dont know the noise of the units, but imagine it to be fairly unobtrusive.
Coach 500 1998