12-05-2013, 01:55 PM
I replaced the incoming electrical indicator lights and they are now all working as designed. Both the two 240V lights and the two 120V lights are lit when plugged into 50 amp power.
I also replaced the fire extinguisher charge indicator light that was in the same panel. It is a little different light as it is 14 volts. I found it at the link below:
http://www.bulbtown.com/GREEN_14V_SOLICO..._p/b32.htm
I also replaced the fire extinguisher charge indicator light that was in the same panel. It is a little different light as it is 14 volts. I found it at the link below:
http://www.bulbtown.com/GREEN_14V_SOLICO..._p/b32.htm
Steve Bare
1999 Newell 2 slide #531