[caprescue]

Last night we rebuild the mac valve and Bode Cylinder with the gasket kit from Newell. after adjusting the MAC valve (THANK YOU NEWELL GURU SITE) we discovered that the buttons on the outside didn't work, then after a couple of more try's neither would work, So we took off the black control panel by the kitchen sink and discovered a black wire on a white control box was loose. It was 1am when we quit and have no clue where it goes, we tried a couple of different places that seemed logical but it wasn't.  HELP we need to leave Friday and I cant trigger the door. Does any one have or as made a schematic for the way newell wires the circuitry or send me a pic of where that lead goes. it is marked grd so I trying to find a ground spot.

Thanks in advance

Murray