03-05-2017, 07:00 AM
Having had mine in and out a couple of times for floor work and reupholstery.
Remove the drawers.
Remove four lag bolts in the four corners of the steel frame.
If you have two strong men, you can lift it straight up and over the wooden casement that holds the drawers.
If not look on the sides of the casement for attachment screws. Look along the bottom inside the casement for more attachment screws. Get a long extension for your power driver and take the drawer slide attachments loose from the rear wall.
It is NOT possible to remove the upholstery with the couch in place. Best thing I found for removing the ten gazillion hog rings was miniature bolt cutters.
Are you going to do the couch yourself? If so I have some tricks I learned.
Remove the drawers.
Remove four lag bolts in the four corners of the steel frame.
If you have two strong men, you can lift it straight up and over the wooden casement that holds the drawers.
If not look on the sides of the casement for attachment screws. Look along the bottom inside the casement for more attachment screws. Get a long extension for your power driver and take the drawer slide attachments loose from the rear wall.
It is NOT possible to remove the upholstery with the couch in place. Best thing I found for removing the ten gazillion hog rings was miniature bolt cutters.
Are you going to do the couch yourself? If so I have some tricks I learned.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)