06-05-2017, 04:38 PM
https://www.mcmaster.com/#catalog/123/1200/=17xxx9x Bearing 1638 3/4 ID 2.0 OD
Keep in mind this is not what will come out of the column. You will remove a much smaller bearing from the plastic sleeve. It just so happens the gorilla bearing will fit into a 2 inch bore in the sleeve.
If you want the original bearing then make sure you get one for a 3/4 shaft, GM also made a 1 inch shaft.
Keep in mind this is not what will come out of the column. You will remove a much smaller bearing from the plastic sleeve. It just so happens the gorilla bearing will fit into a 2 inch bore in the sleeve.
If you want the original bearing then make sure you get one for a 3/4 shaft, GM also made a 1 inch shaft.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home )