You are not logged in or registered. Please login or register to use the full functionality of this board...


Slides won’t work
#8

Thanks all. Here’s an update. Battery voltage is 13.3, the coach is in travel mode, (thanks to Tom for telling me how to check). But the auto leveling system and manual leveling are in operational. I did try deflating a seal, and checked that the seal was deflated and the slide still would not operate. Newell is having trouble with there phones and I can’t get through to service. The override switch is set to 220 which I believe is override setting. I’ve tried the reset switch many times. I removed the HWH dash panel and there is a link light that is on, which may mean the control box is broke?
Thanks again for any and all advice.
Randy

Randy and Kelle
2002 Quad slide. #635
24' Pace stacker
Reply


Messages In This Thread
Slides won’t work - by 57 Eldorado - 10-25-2017, 04:31 PM
RE: Slides won’t work - by bikestuff - 10-25-2017, 08:46 PM
RE: Slides won’t work - by 57 Eldorado - 10-26-2017, 04:23 AM
RE: Slides won’t work - by 57 Eldorado - 10-26-2017, 05:07 AM
RE: Slides won’t work - by PlazaGuy - 10-26-2017, 05:26 AM
RE: Slides won’t work - by bikestuff - 10-26-2017, 06:16 AM
RE: Slides won’t work - by Chester Stone - 10-26-2017, 08:19 AM
RE: Slides won’t work - by 57 Eldorado - 10-26-2017, 09:46 AM
RE: Slides won’t work - by RussWhite - 10-26-2017, 10:36 AM
RE: Slides won’t work - by 57 Eldorado - 10-26-2017, 11:47 AM
RE: Slides won’t work - by 57 Eldorado - 10-26-2017, 12:09 PM
RE: Slides won’t work - by Richard - 10-26-2017, 12:11 PM
RE: Slides won’t work - by 57 Eldorado - 10-26-2017, 12:41 PM
RE: Slides won’t work - by RussWhite - 10-26-2017, 01:09 PM
RE: Slides won’t work - by 57 Eldorado - 10-26-2017, 01:25 PM
RE: Slides won’t work - by 57 Eldorado - 10-26-2017, 04:08 PM
RE: Slides won’t work - by RussWhite - 10-26-2017, 06:53 PM
RE: Slides won’t work - by 57 Eldorado - 10-26-2017, 08:33 PM
RE: Slides won’t work - by Richard - 10-27-2017, 07:06 AM
RE: Slides won’t work - by encantotom - 10-27-2017, 07:15 AM
RE: Slides won’t work - by RussWhite - 10-27-2017, 08:32 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)