04-09-2021, 03:42 AM
After an in-frame 25K overhaul of my 8V92 a few yrs ago after we just purchased it and after speaking with Tom and Richard, I installed FOUR temp gauges. I replaced the original analog gauge on the dash with a high quality digital gauge and VDO sensor. I added another digital dash gauge/sensor for the other side of the engine using one of the extra wires Newell provides from the front to the back of the coach. So I have 2 digital dash temp gauges. They are always within 1 or 2 deg. of each other. I also installed 2 mechanical gauges (with capillary tubes) in the bedroom. (One on each side of the engine.) There were plenty of plugs to allow for replacement with the sensors. The sensors are all located just below the thermostats. Yes, I'm paranoid.