[Jackflash]

I believe I have found the culprit, the push button on the outside of the door. I pulled one of the leads off of it and the door started functioning properly. Problem no is that there is no way to operate the door from the outside now. Ordering a new button from Newell but getting the old one out and the new one in is going to be an exercise in frustration, it is mounted aft of the door right at floor level and the bulkhead that separates the cabinet space under the sink and that little space at the entry door where all the switches are mounted is directly in line with it. No clue how I'm going to get to that nut on the switch with enough strength to break it loose.