03-21-2013, 04:55 PM
I have serviced a few Delta faucets in our Rentals. When we replace I always specify Delta..I have found that Gibbs penetrate can be effective.
http://www.gibbsbrand.net/
It is different than other penetrating "oils" in that it is very thin viscosity. Squirt some into the thread area, tap the fitting a few times, and repeat every hour or so for a day before trying to loosen. If you can let it set overnight as it soaks that would be better.
http://www.gibbsbrand.net/
It is different than other penetrating "oils" in that it is very thin viscosity. Squirt some into the thread area, tap the fitting a few times, and repeat every hour or so for a day before trying to loosen. If you can let it set overnight as it soaks that would be better.
1993 Newell (316) 45' 8V92,towing an Imperial open trailer or RnR custom built enclosed trailer. FMCA#232958 '67 Airstream Overlander 27' '67GTO,'76TransAm,'52Chevy panel, 2000 Corvette "Lingenfelter"modified, '23 Grand Cherokee.