10-24-2021, 05:15 AM
Just curious if anyone has any help for me. My front 1/2 bath toilet is not flushing. This is what is going on -
1. When press flush button the system makes a sound for 1 second and shuts off
2. Had a tech look at it briefly and he stated -
"It appears that the electric water control valve in the bay does not open all the way to allow enough water to create the pressure for it to flush. Also the 120 volt water pump will only run up to 50 lbs of pressure and the manual calls for 65. It also drops to 25 lbs before kicking in again."
Any ideas? The rear works just fine btw.
Thanks - Brian
1. When press flush button the system makes a sound for 1 second and shuts off
2. Had a tech look at it briefly and he stated -
"It appears that the electric water control valve in the bay does not open all the way to allow enough water to create the pressure for it to flush. Also the 120 volt water pump will only run up to 50 lbs of pressure and the manual calls for 65. It also drops to 25 lbs before kicking in again."
Any ideas? The rear works just fine btw.
Thanks - Brian
Brian & Andrea Wasserman
2015 Newell 2020P
Coach #1511 - “God Speed”
2020 Jeep Wranger Toad