[pairodice]

Preface: I can hear the 120v pump running when I click the switch and there is definitely water in the tank the valves are correctly positioned in the bay to give me water to the interior, and the correct sporlan(?) valves are open on the water manifold. 

Issue 1: By ‘Under Pressure’ I meant that I am not getting much pressure out of my shower and kitchen sink using the 120v (headhunter?) water pump - the stinking 12v has never worked except for about 5 minutes after I replaced it and then I got sidetracked on more important issues (and work).  

Issue 2: When I turn on the 120v switch (using the inverter or plugged in to shore power/generator) the water ‘sometimes’ works, sometimes doesn’t.  

Issue 3: If I turn on the kitchen sink it will start to run (most of the time), then I can go into the bath and turn on the sink and it will start running fine with decent pressure (sometimes it will start without the kitchen sink going).  The Kitchen sink always has low pressure - not sure if there is a pressure valve somewhere that I’m not seeing.  Toilet: if I turn on the pump switch (near the microwave) the toilet usually (rarely) will flush with water.  It has been doing this for a while but it’s annoying on this trip not to have water or have to chase it down to get the toilet to flush!  

Wow, I didn’t realize I had so many issues! Lol