04-05-2022, 01:01 PM
Hi All,
Was just troubleshooting my 12V Air Compressor in the Aquahot bay. I traced a bunch of wires through some looms into this silver box. No markings on it. Upon closer inspection and disassembly it looks like it has some burn spots. Back probing the plug shows Red wire is 12v Hot and the one next to it is 12 Neg. The other two have about 1 volt less on them but appear to be both Positive.
Any idea what this does??
I believe the fuse for the 12V compressor is under a carpeted box velcroed to the wall in a driver's side bay across from my inverter mountings.
Thanks!
Was just troubleshooting my 12V Air Compressor in the Aquahot bay. I traced a bunch of wires through some looms into this silver box. No markings on it. Upon closer inspection and disassembly it looks like it has some burn spots. Back probing the plug shows Red wire is 12v Hot and the one next to it is 12 Neg. The other two have about 1 volt less on them but appear to be both Positive.
Any idea what this does??
I believe the fuse for the 12V compressor is under a carpeted box velcroed to the wall in a driver's side bay across from my inverter mountings.
Thanks!
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan