11-23-2023, 06:30 AM
OK, so I am a moron.
I bought a bunch of fittings to cap off the inlet and outlet hoses for the heat exchanger under the couch. Figuring I would then energize the circulation pump for that zone and regain use of the heater under the sink cabinet.
Right after I got it all capped and leak free I remembered...It's a LOOP!
So no heat unless I find a way to get out and buy a 3/4 MtM barb fitting.
Moral of the story here is do not attempt to figure anything out when overtired.
Thankfully,
The new heater will arrive at Steve's and hopefully will go in without too much struggle.
We'll see!
I bought a bunch of fittings to cap off the inlet and outlet hoses for the heat exchanger under the couch. Figuring I would then energize the circulation pump for that zone and regain use of the heater under the sink cabinet.
Right after I got it all capped and leak free I remembered...It's a LOOP!
So no heat unless I find a way to get out and buy a 3/4 MtM barb fitting.
Moral of the story here is do not attempt to figure anything out when overtired.
Thankfully,
The new heater will arrive at Steve's and hopefully will go in without too much struggle.
We'll see!
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan