[Latitude 28]

Update...
Tom McCloud called with some troubleshooting information.......thanks Tom!  Long story short we are up and running at the correct travel height.  Tom, asked if we used auto leveling which we do.  He said that the algorithm for auto level can do wacky things if its stuck in auto level....i.e. trying to dump the front raise the back and visa versa.  I asked how can one force it to go out of auto level.  The stop button is supposed to do that function.  Then.....light bulb moment....from a past HWH control panel function problem that self corrected by disconnecting the panel for 30 seconds....I did just that for a hail Mary try.  Also, Doris could not release the parking brake so she used her foot to push the brake release.  He gave me some other things to try by having Doris activate the dump....raise buttons to check magnetism of the solenoid functions with a steel object, which we did and all valves where at least magnetized.   Most likely the culprit was me doing a soft push on the brake release.  Doris' foot actually sent the valve to the correct seated position thus engaging the proper switches.  Still not sure about stuck in auto level mod but will check it on the next stop.   Than