10-14-2022, 06:38 AM
Great point from Gordon using a light bulb. I've had a few instances where 12 volt power tested good but when a load was put on the voltage dropped down to where whatever component wouldn't work properly. It was usually a wiring problem either ground or power. Sometimes it was a bad connector (bad crimp) or a broken wire. Just another area to look for.
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337