02-12-2023, 11:31 AM
Hey All,
So, the link at the end of the Kwikee A arm has broken. Motor is fine, controller is fine, switch is fine. Steps themselves are a bit bent when i got them.
Gearbox # is the old 151320 and the Arm is labeled 151384
new Gearbox appears that it will fit fine, but the motor fits differently (angle) on the gearbox so the cover will not attach.
I ordered a new compatible gearbox from Amazon:
https://www.amazon.com/dp/B0BD7VDK5Y?psc...ct_details
I have the steps removed at the moment, and am also wondering if I should attempt to bend the step arms straight.
Lastly, can you open the light housing to replace the bulb?? I believe it's a 193/194 style.
Any help would be great!
So, the link at the end of the Kwikee A arm has broken. Motor is fine, controller is fine, switch is fine. Steps themselves are a bit bent when i got them.
Gearbox # is the old 151320 and the Arm is labeled 151384
new Gearbox appears that it will fit fine, but the motor fits differently (angle) on the gearbox so the cover will not attach.
I ordered a new compatible gearbox from Amazon:
https://www.amazon.com/dp/B0BD7VDK5Y?psc...ct_details
I have the steps removed at the moment, and am also wondering if I should attempt to bend the step arms straight.
Lastly, can you open the light housing to replace the bulb?? I believe it's a 193/194 style.
Any help would be great!
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan