09-04-2023, 08:46 PM
To help with cooling the inverters I added 3 small blowers to circulate air directly around the inverters. I may add more to circulate in the bay as I am trying to avoid active air conditioned cooling.
The blowers had a much better form factor for my installation than typical fans and can target where I felt I needed to cool.
Victron had a perfect relay program that powered a relay when the inverter fans turn on that will minimize fan run time.
They blow up the sides of the inverters an cool very well moving heat away
My first test it is about 95F outside and I was drawing about 8000W Load charging an electric car. All is well about 45 min in......
The blowers had a much better form factor for my installation than typical fans and can target where I felt I needed to cool.
Victron had a perfect relay program that powered a relay when the inverter fans turn on that will minimize fan run time.
They blow up the sides of the inverters an cool very well moving heat away
My first test it is about 95F outside and I was drawing about 8000W Load charging an electric car. All is well about 45 min in......