[hypoxia]

Both motion sensors did not work so the awnings would not automatically retract when the wind started blowing.  The awning control was flashing red which indicates a fault in the motion sensor.  Called Newell & found the awning control box in the rear closet underneath the circuit breaker box velcro'd to the side wall carpet.  It was suggested to check the wiring on the roof at the awnings.  Sure enough both awnings had problems there.  One had 2 broken wires, the other had insulation disintegrating inside the outer sheathing, mainly the white wire.  The wiring is weatherproof and UV rated but that piece didn't fare well up there.  Was told the wire sometimes gets crimped at the awning arms when they fold up.  The connectors I'm trying out are the same as the phone company has used, Ideal 85-950 Telephone Splice Connectors with moisture sealant.  Will see how that works out.  The motion sensors work now and the red light is no longer flashing.