03-18-2024, 06:16 PM
On my 96 #423 I have 2 12V water bumps in the water back cabinet. If I connect city water and open that valve, but leave the PUMP (I only use one and keep the other for backup) will I have an issue?
I.e. will the tank fill/overfill? Over pressure in the system?
Ideally I'd simply like the tank to stay full and the pump to stay ON.
Otherwise, I will have to monitor my tank and fill when needed. I RARELY stay anyway for more than a couple or three days, but this time I will have access to water for a week.
What do you all think the best strategy would be?
Thanks!
I.e. will the tank fill/overfill? Over pressure in the system?
Ideally I'd simply like the tank to stay full and the pump to stay ON.
Otherwise, I will have to monitor my tank and fill when needed. I RARELY stay anyway for more than a couple or three days, but this time I will have access to water for a week.
What do you all think the best strategy would be?
Thanks!
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan