Posts: 208
Threads: 17
Joined: Mar 2013
Does anyone have a spare blade arm for 42 inch craftmade ceiling fan. 281-687-8687
![Rolleyes Rolleyes](https://newellgurus.com/images/smilies/rolleyes.gif)
Ashley Pardue Coach 589
(This post was last modified: 05-31-2013, 09:00 AM by
ashley.)
Posts: 1,479
Threads: 98
Joined: Jul 2012
I do not have a spare blade, but would like to know how to balance mine. It shakes at any speed more than very slow.
2001 Newell #579
tow a Honda Odyssey
fun car: 1935 Mercedes 500K replica
Posts: 829
Threads: 75
Joined: Jul 2012
Posts: 2,668
Threads: 226
Joined: Jul 2012
I have always been a big "fan" of Hunter Classic ceiling fans. Not the new type but the old cast iron pancake motors. If I could find one with the smaller blades I'd gladly change out the one in my coach.
In fact I have one of the last brass fans they made sitting in the box for whenever I buy another house.
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337
Posts: 829
Threads: 75
Joined: Jul 2012
Posts: 208
Threads: 17
Joined: Mar 2013
Has to be craft made
![Rolleyes Rolleyes](https://newellgurus.com/images/smilies/rolleyes.gif)
Ashley Pardue Coach 589
Posts: 509
Threads: 10
Joined: Mar 2013
Ashley,
Have you considered replacing all of the arms with matching new ones? Would the new arms have matching mounting holes, lack of which would be nearly a deal killer?
Rudy Legett
2003 Foretravel U320 4010
ISM11 450 hp Allison 4000R
Factory Authorized Aqua Hot Repair Center
Southeast Texas Area
Posts: 208
Threads: 17
Joined: Mar 2013
Rudy tried that but holes would not match. Factory quit making them. Hoping someone had to replace one. Comes four even if you need one
![Rolleyes Rolleyes](https://newellgurus.com/images/smilies/rolleyes.gif)
Ashley Pardue Coach 589
(This post was last modified: 05-31-2013, 09:39 AM by
ashley.)
Posts: 829
Threads: 75
Joined: Jul 2012
do you no the bolt hole spacing.. many have the same spacing.. there is a lot out there..
http://www.ebay.com/sch/i.html?_trksid=p...&_from=R40
Jimmy
Posts: 208
Threads: 17
Joined: Mar 2013
Its not just the hole spacing but the curve of the holder to position the blade in the proper place
![Rolleyes Rolleyes](https://newellgurus.com/images/smilies/rolleyes.gif)
Ashley Pardue Coach 589