05-09-2022, 11:20 PM
Any clarification on realigning the slide by adjusting or shimming the slide blocks? I've noticed the top front of the bedroom slide has very little clearance whereas the top rear has over an inch. Didn't think too much of it, however the slide has started coming too far in when retracted on the top front by about 3/4 of an inch and the pin won't align, forcing me to cycle the slide a couple of times to get it to seat correctly. I have also noticed when extended during heavy rains water will enter on bottom rear of the slide due to the excess clearance in the rear. Being in Alaska going to the factory is not an option - any ideas?
Jesse & Sara White
2001 Newell 582
Wasilla Alaska
Jesse & Sara White
2001 Newell 582
Wasilla Alaska