04-02-2014, 03:58 PM
I have bought the CORIAN Adhesive from a Dealer before so I would try that first. ebay link;
http://www.ebay.com/sch/i.html?_trksid=p...&_from=R40
2ndly it is pure Epoxy so you could use an Epoxy to adhere it problem would be that the joint would show without the coloring (pigment). I would suggest that you clean the old epoxied joint with a router using a straight edge as a guide, then clamp together on a FLAT surface using numerous clamps. You may be better off to simply put it away until you get to Tom's Bus Repair Haven.
http://www.ebay.com/sch/i.html?_trksid=p...&_from=R40
2ndly it is pure Epoxy so you could use an Epoxy to adhere it problem would be that the joint would show without the coloring (pigment). I would suggest that you clean the old epoxied joint with a router using a straight edge as a guide, then clamp together on a FLAT surface using numerous clamps. You may be better off to simply put it away until you get to Tom's Bus Repair Haven.
Steve & Patti, Bonnie and Tucker
1982 Newell 38' Classic, DD 6V92
cocktails for as many will fit in the site, dinner for as many can sit at the pick-nick table and sleeps 2 since I fixed the couch