You are not logged in or registered. Please login or register to use the full functionality of this board...


What's it for???
#1

Poking around in the engine compartment I found a gauge I've never seen and didn't know it was there. It is on the back side of the hydraulic pressure controller--if I have that named wrong feel free to correct. There is no way to read it without using a flashlight & a mirror. My coach has been sitting for four months and it is above 2000 psi--maybe not working? Any one familiar with this?


Attached Files Thumbnail(s)
       

Steve Bare
1999 Newell 2 slide #531
Reply
#2

Any chance of a photo?

2001 Newell #579
tow a Honda Odyssey
fun car: 1935 Mercedes 500K replica
Reply
#3

mine had the same thing and it started leaking. so just took it out and plugged it. you couldnt see it anyway

tom

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply
#4

Had same problem Tom leaking out the glass face. Plugged it

Rolleyes Ashley Pardue Coach 589
Reply
#5

We recently discussed the hydraulic pressure gauge on this thread. I left Mexico yesterday and was about 175 miles south of the border when I stopped for coffee. I found oil covering my car and the bottom of the coach engine. I soon found that the hydraulic pressure gauge was leaking oil. Ok, now what do I do? I took it off and noted that the glass was broken and the face was damaged. However, there is a small hole in the back to measure the pressure. A drop of super glue and a tooth pick saved the day. Ample time now to find a plug.

2001 Newell #579
tow a Honda Odyssey
fun car: 1935 Mercedes 500K replica
Reply
#6

Good repair Chester!
It will probably take a 1/4" NPT plug. Any hardware store will have one, use black iron. Do not use galvanized, it won't stand the pressure.

Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486 

1993 Newell 39' #337 
Reply
#7

Thats great Chester!! Its amazing what you can do with a little thought and ingenuity!!

Love old schoolHeart
1976 Newell 8.3 cummins allison 6spd
1977 Newell 8.3 cummins allison 6spd
Reply
#8

If anyone is interested, the thread for a plug is a metric 8 .10 with a neapream "O" ring. In the long run, I think a plug will be better that a tooth pick.

2001 Newell #579
tow a Honda Odyssey
fun car: 1935 Mercedes 500K replica
Reply
#9

Metric? with an o-ring. Interesting! Mine is already plugged but it might be a good idea for others who still have the gauge to buy a plug just in case.

Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486 

1993 Newell 39' #337 
Reply
#10

    Can somebody tell me what this is for? My service center took it off today and sent a picture to Newell and they couldn't identify it. It appears to be some sort of sensor and it was dripping some oil. They put a plug in where it came out and all the warning lights on the dash went out when it was started.

94 Newell #365, 2009 Smart, 2005 500SL, 2012 ML350, 1934 Ford Streetrod Golf Cart, 1958 Century Coronado, 1965 Cruisers Inc. Car and Boat CrazyTongue
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)