11-10-2014, 06:41 AM
Richard & Russ, you guys have nailed the comment I made about the 120V running without the protection of the pressure switch (aka well pump switch) while the HWH is in level mode and needing air.
Newell is using a pressure regulator ( the regulator without any connection to the output) as opposed to a "pop off" relief. I'm not sure how this regulator works as a pressure relief device just yet since the device is normally open until the set point is met. I believe it is designed to work as a pressure relief device (normally closed until set point is reached) and different from the other regulators in use on our coaches.
Anybody have insight to this device?
Newell is using a pressure regulator ( the regulator without any connection to the output) as opposed to a "pop off" relief. I'm not sure how this regulator works as a pressure relief device just yet since the device is normally open until the set point is met. I believe it is designed to work as a pressure relief device (normally closed until set point is reached) and different from the other regulators in use on our coaches.
Anybody have insight to this device?
Gordon Jones
2000-45'-2slide-#567