You are not logged in or registered. Please login or register to use the full functionality of this board...


Pressure in the slide seals
#6

(11-08-2017, 02:47 PM)bikestuff Wrote:  I agree that I will have to take it back....but the question remains about the correct air pressure for the seals.  Mine are all over the place, and I suspect most coaches are the same way.  

Also, maybe a smart guru has already figured out how to solve this problem.  I am beginning to think that some sort of vertical pillar is needed to support the middle of the slide when extended.

20 PSI +/- 2 PSI

This time of year look for leaves, acorns, pine needles, and other debris between seal and top of the slide out.
Reply


Messages In This Thread
Pressure in the slide seals - by bikestuff - 11-08-2017, 10:36 AM
RE: Pressure in the slide seals - by encantotom - 11-08-2017, 11:41 AM
RE: Pressure in the slide seals - by ccjohnson - 11-08-2017, 02:13 PM
RE: Pressure in the slide seals - by folivier - 11-08-2017, 02:47 PM
RE: Pressure in the slide seals - by bikestuff - 11-08-2017, 02:47 PM
RE: Pressure in the slide seals - by jimg - 11-09-2017, 05:49 AM
RE: Pressure in the slide seals - by bikestuff - 11-09-2017, 06:22 AM
RE: Pressure in the slide seals - by jimg - 11-09-2017, 01:02 PM
RE: Pressure in the slide seals - by bikestuff - 11-10-2017, 07:50 AM
RE: Pressure in the slide seals - by Chester Stone - 11-10-2017, 08:22 AM
RE: Pressure in the slide seals - by bikestuff - 11-10-2017, 10:41 AM
RE: Pressure in the slide seals - by folivier - 11-10-2017, 05:39 PM
RE: Pressure in the slide seals - by encantotom - 11-10-2017, 08:02 PM
RE: Pressure in the slide seals - by Yachts - 11-13-2017, 10:36 PM
RE: Pressure in the slide seals - by bikestuff - 11-14-2017, 06:29 AM
RE: Pressure in the slide seals - by Richard - 11-14-2017, 09:46 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)