[bikestuff]

Yes on valid slides. No on two bladders (at least I think no. There is a weird joint on top that looks like a splice, but only one controller and both sides are inflated.

It looks to me that the bar is is mis-aligned. It is hitting just below the slot. That means two things. First, the top of the slide is not "de-sagged" and the front (inside) of the slide is bowed in. Neither of these situations is ideal.

I am parked on flat ground and only run the rooms while in travel mode. The idea that I have not tried is to change the order of the which rooms I extend first. Currently, I start with the rear drivers side (#2) slide then #3 then #4 and finally the big one #1. When I move in the next couple of days, I will start with #1 and work my way around the coach.

I am not sure why I started with #2 but I have always been careful not to put out two diagonal slides. (#1 and # 3) or (#2 and #4).

The thing that makes this challenging, is that you have to look on top of the slide with a flashlight to see if it is borked up. You cannot see from the outside because the slide is in the way. The only symptom is water pouring into the coach during a rain storm.

Thanks for the interest!
bill