12-16-2017, 01:05 PM
Paul,
The "T" handles on the solenoids is to take pressure off the system. You turn the handle 3-5 turns ccw. With the handle backed off you can remove the solenoid. As a troubleshooting hint, sometimes exchanging two solenoids from one position to another will identify whether a solenoid is functioning.
The "T" handles on the solenoids is to take pressure off the system. You turn the handle 3-5 turns ccw. With the handle backed off you can remove the solenoid. As a troubleshooting hint, sometimes exchanging two solenoids from one position to another will identify whether a solenoid is functioning.
Steve Bare
1999 Newell 2 slide #531