01-25-2020, 03:20 PM
The seal is stuck between the slide and the floor. I have sprayed soap, pulled pushed ran the slide in and out to no avail As you can see in the photo it’s twisted several times on the Piece that I have pulled out so I’m guessing it’s also twisted on the section trapped back under the slide.
I’m hoping jacking the slide up a bit will free it up and was wondering if anyone has experience in cribbing the bottom of the slide to support it and spread the load from the jacks
I’m hoping jacking the slide up a bit will free it up and was wondering if anyone has experience in cribbing the bottom of the slide to support it and spread the load from the jacks
Bruce & Val
New Owners 1999 Newell #528