05-07-2022, 06:11 AM
As far as I can tell, the ABS sensor is just a transducer that “senses” the toothed part of the hub. Although the tolerance between the sensor and the teeth is critical….the electrical conveyance to the ABS controller is not. So….if you splice in a wire to cover the broken part….its probably gonna work.
The reason that you have not noticed the ABS light on the dash is because 1) the PO took the bulb out or 2) the bulb burned out. The ABS light on the dash turns on for a few seconds when you turn the ignition key to the first position.
Bill
The reason that you have not noticed the ABS light on the dash is because 1) the PO took the bulb out or 2) the bulb burned out. The ABS light on the dash turns on for a few seconds when you turn the ignition key to the first position.
Bill
Bill Johnson
Birmingham, Alabama