10-21-2021, 07:42 AM
NO, don’t move anything else.
First, take a small screwdriver and see if the switch clicks when you press on the button. If it doesn’t click, then loosen the holding screws and readjust till it clicks.
Second, confirm the switch is wired to the two blue wires.
Third, unwire the switch and check for continuity using your voltmeter set on ohms.
Fourth confirm wiring in HWH bay with diagram I sent you when this first started.
Fifth, post some pictures of what you have.
Sixth, did you unwire the switch to move it to allow the room to come in further?
Seventh, did you adjust the screw bolt that mechanically prevents the room from coming in too far?
You ordered the right switch, it can be wired normally open or normally closed. Make sure if you replace it, you get that right, or you will ventilate the roof.
First, take a small screwdriver and see if the switch clicks when you press on the button. If it doesn’t click, then loosen the holding screws and readjust till it clicks.
Second, confirm the switch is wired to the two blue wires.
Third, unwire the switch and check for continuity using your voltmeter set on ohms.
Fourth confirm wiring in HWH bay with diagram I sent you when this first started.
Fifth, post some pictures of what you have.
Sixth, did you unwire the switch to move it to allow the room to come in further?
Seventh, did you adjust the screw bolt that mechanically prevents the room from coming in too far?
You ordered the right switch, it can be wired normally open or normally closed. Make sure if you replace it, you get that right, or you will ventilate the roof.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)