08-14-2021, 08:10 AM
Here are pictures of the not burned terminal along with the nylon screws holding on the terminals that go to the compressors.
This is the still connected but loose 120V connector. Note there is no nylon screw in the center of the terminal.
This is the underside of the same part of the board.
This is the underside of the compressor connectors that have the nylon screws connected.
This is the still connected but loose 120V connector. Note there is no nylon screw in the center of the terminal.
This is the underside of the same part of the board.
This is the underside of the compressor connectors that have the nylon screws connected.
Bill Johnson
Birmingham, Alabama