11-02-2021, 10:16 AM
Mike,
Here is another option I found from a thread on this site.
AMPL START
It only took about 30 minutes to install. I picked up house and starter battery connections on the Multi Battery Isolator mounted above the merge solenoid in the very back cabinet accessed in the engine bay.
I mounted the AMPL START in the cabinet accessed by the starting batteries so I can easily check it.
Here's a picture of the isolator. The battery connections are at either end and the alternator connection is in the middle.
Yes I do need to spend some time cleaning up the connections and other things back there.
That 4 letter word gets in my way a lot.
Here is another option I found from a thread on this site.
AMPL START
It only took about 30 minutes to install. I picked up house and starter battery connections on the Multi Battery Isolator mounted above the merge solenoid in the very back cabinet accessed in the engine bay.
I mounted the AMPL START in the cabinet accessed by the starting batteries so I can easily check it.
Here's a picture of the isolator. The battery connections are at either end and the alternator connection is in the middle.
Yes I do need to spend some time cleaning up the connections and other things back there.
That 4 letter word gets in my way a lot.
Hank & Natalie Bensley
2001 Double Slide #586.
2021 Cherokee Trailhawk Toad
We've been RV owners since 2002.
Port Orange, FL. Soon we will travel full time for "a while"
