01-30-2022, 11:34 AM
I ordered two 20 ton jacks, 25 feet of 1/4 tubing and a cutter. The 2nd and 3rd connections are leaking on the Valid manifold - 2nd is leaking at the brass and the 3rd is leaking at the tubing. We are trying to source a four out (1/4") one or two in (3/8") aluminum manifold.
The MCMaster-Carr in the attachment is pricey ($72+) but includes brass connectors. We are looking at one manifold at Amazon that is all 1/4" to see if we could drill and tap one end to 3/8 NPT.
Amazon Viair manifold
I also looked in the last door on the passenger side which contains the 'Air in' with two filters and the (rear?) 6 pack. Drained both filters and no water, sprayed everything down, no bubbles.
Next week temps will be up and I will get under once the jacks arrive.
The MCMaster-Carr in the attachment is pricey ($72+) but includes brass connectors. We are looking at one manifold at Amazon that is all 1/4" to see if we could drill and tap one end to 3/8 NPT.
Amazon Viair manifold
I also looked in the last door on the passenger side which contains the 'Air in' with two filters and the (rear?) 6 pack. Drained both filters and no water, sprayed everything down, no bubbles.
Next week temps will be up and I will get under once the jacks arrive.
Dave Head & Megan Westbrook
2009 Newell 46' Custom #1261
former Foretravel guru, 93 U280, 95 U320C
Titusville FL (The Great Outdoors)