You are not logged in or registered. Please login or register to use the full functionality of this board...


Electric current felt at tankage bay chassis
#3

Whoa, that is dangerous.

Take your DVM and measure voltage between neutral and ground. It should be zero. https://m.youtube.com/watch?v=-UC-WjkTbc4

If that is OK, then do the same test between neutral and ground on the output of the Hughes autoformer.

Are you using a pre made 30 to 50 adapter or are you using one that someone made?

By the way, this is not a water bay issue, you entire coach is HOT to anyone standing on the ground. This is a very dangerous situation.

Call me 817 223 2056 if you need to.

Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home Cool )
Reply


Messages In This Thread
Electric current felt at tankage bay chassis - by dbld58 - 07-22-2022, 05:50 PM
RE: Electric current felt at tankage bay chassis - by Georgeb - 07-22-2022, 06:26 PM
RE: Electric current felt at tankage bay chassis - by Richard - 07-22-2022, 07:08 PM
RE: Electric current felt at tankage bay chassis - by BusNit - 07-22-2022, 09:58 PM
RE: Electric current felt at tankage bay chassis - by bikestuff - 07-23-2022, 05:10 AM
RE: Electric current felt at tankage bay chassis - by dbld58 - 07-23-2022, 07:04 AM
RE: Electric current felt at tankage bay chassis - by RobSC - 07-23-2022, 07:35 AM
RE: Electric current felt at tankage bay chassis - by Richard - 07-23-2022, 12:09 PM
RE: Electric current felt at tankage bay chassis - by dbld58 - 07-23-2022, 01:18 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)