[Wardworks]

No worries Richard, I'm just a bit cranky because of this happening while I'm trying to enjoy Christmas with my family.

I charged the batteries on an external charger all day. I checked them with a meter last night and they are at 12.6V, I then checked the voltage at both inverters and it's the same 12.6V

I disconnected everything again, waited an hour, connected all back up and both inverter displays turn on, one says it has shore power but the charge light is is not on, it shows 12.6V on the display and then after about a minute the alarm goes off light blinks red and says code 195 on the display and shuts down. The other Inverter shows the shore power green light is on as well as the charge light 12.6V on the display but it says +0.0 on the charge.

One odd thing at least to me that I noticed is once I reconnect shore power, the 120V air compressor and the 120V water pump do not work, but if I start the generator and then shut it off they now work until I disconnect the shore power again. Is that normal or does the transfer switch have an issue.