01-05-2023, 11:05 AM
(Richard was probably waiting for me to post)
I prefer teflon tape for a couple reasons: if applied properly, meaning no tape across the face of the pipe or fitting, it can't allow any pieces to enter the piping. In order to apply it properly you need to wind it on the threads in the direction so that it tightens into the threads. If applied backwards then yes it can loosen while tightening the fitting.
The thing I don't like about teflon goop is that over years it can harden and become crumbly. I've pulled apart piping and have seen crumbly goop partially filling the pipe. Also if you try to tighten or loosen a fitting with dried goop it will leak. Tape will usually be ok since it's a solid.
So there you have it, both sides of the fence. Both solutions work so use what you're comfortable and familiar with.
BTW in almost 30 years I've never had a problem with tape if it was applied properly, this is from ounces of pressure to over 2000 psi.
I prefer teflon tape for a couple reasons: if applied properly, meaning no tape across the face of the pipe or fitting, it can't allow any pieces to enter the piping. In order to apply it properly you need to wind it on the threads in the direction so that it tightens into the threads. If applied backwards then yes it can loosen while tightening the fitting.
The thing I don't like about teflon goop is that over years it can harden and become crumbly. I've pulled apart piping and have seen crumbly goop partially filling the pipe. Also if you try to tighten or loosen a fitting with dried goop it will leak. Tape will usually be ok since it's a solid.
So there you have it, both sides of the fence. Both solutions work so use what you're comfortable and familiar with.
BTW in almost 30 years I've never had a problem with tape if it was applied properly, this is from ounces of pressure to over 2000 psi.
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337