06-30-2013, 06:13 AM
Yesterday while driving towards Sheridan, WY my cruise control quit working and my VMSPC started acting weird, some of the gauges would go to 0 then after a few minutes would come back. And whenever I would press my brake pedal the rearview camera would go blank, it would stay on but would lose the picture. Then it would take a few seconds for the gauges to update.
Also once I hooked up to electric my inverter panel showed an E-13 error (battery 2 sense leads open) I checked the battery and it was fine. I checked the fuses and wires under the kick panel and all looked ok.
This was the first time I used my cb radio, which didn't work right. I could only transmit or receive about 100 yards. I eventually turned it off but not sure if it was related to the other problems or not.
Any ideas?
Also once I hooked up to electric my inverter panel showed an E-13 error (battery 2 sense leads open) I checked the battery and it was fine. I checked the fuses and wires under the kick panel and all looked ok.
This was the first time I used my cb radio, which didn't work right. I could only transmit or receive about 100 yards. I eventually turned it off but not sure if it was related to the other problems or not.
Any ideas?
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337